News

News

Technology transforms the world · Integrity builds the future · Leading boundless possibilities

Company News

Industry News

New Year's Day

Category:

Company News

Release Date:

2025-12-29

Jiaxun Electronics wishes you a happy New Year!

Keywords:

New Year's Day

Previous page

Jiaxun Electronics: Notice of Labor Day Holiday

SMA/SMAF/SMB/SMC: Introduction to the DO-214 Series Diode Package

Next page

Related News

Is the DC output voltage of the high-power bridge rectifier too low? Check these components.

Is the DC output voltage of the high-power bridge rectifier too low? Check these components.

During power‑supply maintenance or debugging, a noticeably low output DC voltage from a high‑power bridge rectifier—e.g., the nominal 48 V measured at only about 30 V—is a common and frustrating issue. Many people immediately suspect that the bridge rectifier itself is damaged; however, in most cases, the reduced voltage is not due to complete failure of the bridge but rather to problems elsewhere in the circuit.

2026/05/11

What should you do when a high-power bridge rectifier generates significant heat? Practical measurements on heatsink selection and installation.

What should you do when a high-power bridge rectifier generates significant heat? Practical measurements on heatsink selection and installation.

High‑power bridge rectifiers play a critical role in converting AC to DC in rectifier circuits. When the load current is substantial, the four rectifier diodes within the bridge alternately conduct, each incurring a forward voltage drop and associated power loss; these losses are ultimately dissipated as heat. If this heat is not efficiently removed, the junction temperature of the bridge rectifier can rise rapidly, compromising operational stability in mild cases or leading to thermal breakdown and failure in severe cases. So, when a high‑power bridge rectifier exhibits excessive heating, how should one properly select and install an appropriate heat sink?

2026/05/08

Rectifier Diode Selection Guide: How to Match Voltage Rating, Current Rating, and Reverse Recovery Time?

Rectifier Diode Selection Guide: How to Match Voltage Rating, Current Rating, and Reverse Recovery Time?

In power‑supply circuit design, the selection of rectifier diodes directly affects the overall reliability and efficiency of the system. Choosing a device that is too small can lead to thermal failure, while selecting one that is excessively oversized not only increases costs but may also cause malfunctions due to mismatched electrical parameters.

2026/05/07

What causes rectifier diodes to frequently burn out? Troubleshooting steps and preventive measures.

What causes rectifier diodes to frequently burn out? Troubleshooting steps and preventive measures.

In power‑supply repair and electronic equipment commissioning, blown rectifier diodes are a fairly common failure mode. The failure of a single rectifier diode can often prevent the entire circuit from functioning properly and may even trigger cascading damage to other components. By understanding the primary causes of such failures, mastering the correct troubleshooting procedures, and implementing effective preventive measures, you can reduce the frequency of malfunctions and extend the service life of your equipment.

2026/05/06

Contact Information

Guangdong Jiaxun Electronics Co., Ltd.

WeChat consultation

WeChat consultation

WeChat consultation

WeChat consultation

If you have any questions, please contact us.

Submit Now

What services can we offer?

Copyright © 2026 Guangdong Jiaxun Electronics Co., Ltd. High-tech Enterprise: GR2019440006513Website Development: China Enterprise Dynamics Dongguan Tag