Quick‑Recovery Bridge/Soft Bridge HBS810: Comprehensive Technical Specifications and Application Scenarios

About Quick Recovery Bridge / Soft bridge HBS810 Comprehensive Technical Specifications , The application scenarios and vendor information are as follows:

I. Basic Parameters and Characteristics

Structure and Packaging

by 4 It consists of a fast recovery diode and employs HBS-4 Encapsulation (Ultra-thin patch design), compact size (approximately 0.76 cm × 0.70 cm × 0.15 cm ).

Forward voltage drop 1.1V@8A , reverse breakdown voltage 1000V , rectified current 8A , with reverse leakage current as low as 5 μA @ 1 kV , supports high-temperature operation ( -55℃~150℃ ).

Performance Advantages

The fast recovery characteristic reduces switching losses, making it suitable for high-frequency circuits; its surge current withstand capability reaches 200A , highly reliable.

Compatible with the requirements of new energy equipment, such as charging piles and inverters, in high-voltage applications.

II. Typical Application Areas

Power Supplies and Charging Devices

Used for PD Fast charging, gallium nitride chargers, adapters, and more—enhancing… AC/DC Conversion efficiency.

It is used for high-voltage rectification in the new energy sector, such as photovoltaic inverters and on-board chargers.

Industry and Consumer Electronics

Integrated into small appliance control boards, LED Power supplies, communication equipment, and the like.

III. Procurement and Selection Recommendations

Suppliers and Channels

Original factory stock ： Good news Supplied by manufacturers such as Zhengxin Electronics, supporting customized requirements.

E-commerce platform Alibaba 1688 Bulk supply available.

Alternative Models and Compatibility

Similar to encapsulation, optional MSB Series (such as MSB40M ), RHBS Series (such as RHBS410/610 ), current coverage 4A-8A。

IV. Precautions for Use

Working conditions : Avoid exceeding the rated voltage / Current: When designing, sufficient margin should be provided (e.g., for heat dissipation and derating).

Welding and Installation : For surface-mount packages, reflow soldering is recommended to prevent damage from mechanical stress. 。